Constructed from stainless steel, our thermopockets allow for a probe to be removed from it’s situation, for example for calibration or measurement, without the need to drain a vessel such as a water tank - thus saving time and cost. Thermopockets also allow for an extra rugged application.
Alternatively they can be
employed to provide additional physical protection to your sensor.
Available as standard with a 12mm outer diameter and ½” BSPT process gland we can construct this in a length to suit your application.
- Stainless steel thermopockets, useful for easy probe removal without draining your
vessel.
- 1/2" BSPT process thread with suitable compression fitting.
Standard sizes, custom enquiries welcome.
| Probe diameter x insertion depth |
|---|
| 6mm x 50mm |
| 6mm x 100mm |
| 6mm x 150mm |
| 6mm x 300mm |
| 1/4" x 50mm |
| 1/4" x 100mm |
| 1/4" x 150mm |
| 1/4" x 300mm |
